Click Image for Gallery
AEG FSB41600ZCustomised Cycles, Complete Cleaning
Advanced sensors in AEG dishwashers automatically adjust the time, temperature and water usage according to the soil level of each load. So you can have customised cycles for each clean with the very best results every time.
Capacity: 13 place settings: Capacity is based on 'IEC' standard place settings. This standard allows you to compare the capacity of dishwashers using a common measure.
Sensorlogic: Sensorlogic uses sensors in the dishwasher to measure the size of the load and the level of soiling. The wash programme is then adjusted to give the best possible performance whilst keeping water, electricity and detergent to a minimum.
4 temperature settings
5 programmes including:
30 min 60° quickwash: For an extra quick wash or freshen up.
Rinse and hold
Auto half load: Auto half load allows the dishwasher to determine whether there is a full or half load and will moderate the water and energy consumption accordingly.
Multi-tab: Optimises the cleaning results of all-in-one detergents by ensuring that all the elements of the detergent are used in the correct phase of the cycle for perfect results.
Delay start of up to 24 hours: You can set the wash programme to start in up to 24 hours enabling you to use your time efficiently without worrying about your laundry.
Time remaining indicator: Indicates the amount of time remaining until the programme ends.
Noise level, dB(A): 47
Cleaning efficiency (2010/30/EC): A
Drying efficiency (2010/30/EC): A
Declared programme (2010/30/EC): Eco 50
Drying System: AirDry Technology
Connected Load: 1950
Energy efficiency (2010/30/EC): A+
Energy consumption (annual): 295
Annual water consumption, l: 2775
Water consumption, l: 9.9
|Noise level||47 dBA|
|Size||818 x 596 x 575 mm|