GAGGENAU CV 282 111

-2% GAGGENAU CV 282 111

Manufacture site

Click here

Manual

Not Available

GAGGENAU CV 282 111

hob
with integrated ventilation system 200 series
stainless steel
frame,
width 80 cm
Exhaust / recirculation mode


Solid stainless steel frame
Flex function for combining the rectangular cooking surfaces
Free placement of the cookware within the interconnected cooking surfaces
Highly efficient ventilation system integrated in the hob
Fully automatic functions of the ventilation system

Cooking zones
2 flex induction hobs 20x24 cm (2200 W, with booster 3700 W), interconnected 40x24 cm (3300 W, with booster 3700 W).
2 flex induction cooking areas 20x24 cm (2200 W, with booster 3700 W), linked together 40x24 cm (3300 W, with booster 3700 W).
Performance ventilation system
Power and noise, level 3 / intensive: air power according to EN 61591. Sound power level according to EN 60704-3. Odor reduction in circulating air according to EN 61591.
Abluft: 532 / 636 m³/h. 70 / 74 dB (A) re 1 pW.
Umluft: 497 / 627 m³/h. 67 / 72 dB (A) re 1 pW.
service
Twist pad operation with removable magnetic toggle.
User-friendly operation thanks to the two-color display (white / orange).
Marking of the cooking zones and cooking surfaces.
Electronic control of the cooking zones in 17 power levels.
Control of the ventilation system with 3 electronically controlled power levels and 1 intensive level.
Furnishing
Flex function for rectangular cooktops.
Automatic pan detection when the hob is switched on.
Professional cook function.
Cooking sensor function (when using the CA 060 300 cooking sensor).
Bratsensor-Funktion.
Booster function pots.
Booster function for pans.
Keep warm function.
Automatic sensor-controlled performance adjustment of the ventilation system.
Automatic switching on of the ventilation system when using a cooking zone.
Interval ventilation, 6 min.
Sensor-controlled overrun.
Grease filter and recirculation filter saturation display.
Removable grease filter unit, dishwasher safe.
High-quality black cover for ventilation system made of die-cast zinc, dishwasher-safe.
Blower technology with highly efficient, brushless DC motor (BLDC).
Fluidically optimized interior for efficient airflow.
Stopwatch.
Automatic cooking time up to 99 minutes.
Minute minder.
Memory-Funktion.
Options menu.
Energy management.
Home network integration for digital services (Home Connect) wirelessly via WiFi.
The use of the Home Connect function depends on the Home Connect services, which are not available in every country. Further information can be found at home-connect.com.
Consumption data
Energy efficiency class A on a scale of efficiency classes from A +++ to D.
Average energy consumption 56.9 kWh / year.
Fan efficiency class A.
Lighting efficiency class -.
Grease filter efficiency class B.
Noise min. 61 dB / max. 70 dB normal level.
safety
Main switch.
Operating display.
Topferkennung.
2-stage residual heat display.
Parental controls.
Safety shutdown.
Two-stage overflow protection removable, dishwasher safe.
Removable overflow tank, capacity 0.9 liters, dishwasher safe.
Planning notes
Base cabinet width: min. 60 cm.
Worktop depth: min. 60 cm with unguided air circulation, min. 65 cm with guided air circulation / exhaust air.
Immersion depth 227 mm.
For the unguided air recirculation set (CA 082 010) a vertical opening of min. 25 mm behind the back of the furniture. 50mm is recommended for optimal performance.
A flat sewer pipe (NW 150) can be connected directly to the connector on the back of the device.
A backflow flap with a maximum opening pressure of 65 Pa should be installed in exhaust air mode.
For optimal performance in recirculation mode, an outflow area of ​​min. 440 cm² recommended.
Only suitable for magnetic cookware. For optimal temperature distribution, cookware with a sandwich base is recommended.
For circulating air installations on non-insulated external walls, a guided circulating air installation is recommended.
The pressure-stable blower allows piping up to 8m with 3x90 ° bends while maintaining adequate performance.
The device must be attached from below.
Device weight: approx. 28 kg.
The device must be freely accessible from below.
When installing ventilation with exhaust air operation and a fireplace-linked fireplace, the power supply to the ventilation units must be equipped with a suitable safety circuit.
The load-bearing capacity and stability, especially with thin worktops, must be ensured by suitable substructures. Take into account the weight of the device including additional loads.
Installation is suitable in worktops made of stone, synthetic material or solid wood. Heat resistance and watertight sealing of the cut edges must be taken into account. For other materials, coordinate with the worktop manufacturer regarding use.
The groove must be continuous and even to ensure that the devices rest evenly on the seal. Do not use selective relining.
The joint width can vary due to dimensional tolerances of the glass ceramic pane and the worktop cut-out.
Connection data
Total connected load 7.4 kW.
Connection cable 1.5 m without plug.
Power standby / display off 0.4 W.
Power standby / network 1.4 W.
Please note the information in the instructions for use if you want to switch off the WiFi function.
Technical
Installation width 80 cm
Size 205 x 792 x 512 mm
Weight 30 kg

Write a review

Note: HTML is not translated!
    Bad           Good
  • Brand: Gaggenau
  • Product Code: CV 282 111
  • Availability: 7-14 working days
  • Free door-to-door delivery, insurance and taxes
    • AU$ 5,099
    • Total price: AU$ 4,997
    • 1 or more AU$ 4,997