GAGGENAU VI 492 113 for AU$4,499.00 at

Manufacture site

Click here


Not Available


Vario flex induction cooktop 400 series
Stainless steel frame
Width 90 cm

Flex function for combining the rectangular cooking areas
Free positioning of cookware inside combined cooking areas
Frying sensor function for temperature control in pans
Large cooking zone for pots up to ø 32 cm
Ideal for the original wok pan with round bottom, with wok ring

Cooking zones
2 flex induction cooking areas 19x23 cm (2200 W, with booster 3700 W), linked together 38x23 cm (3300 W, with booster 3700 W).
1 induction cooking zone ø 21 cm (2200 W, with booster 3700 W), automatically switches to ø 26 cm (2600 W, with booster 3700 W) and to ø 32 cm (3300 W, with booster 3700 W).
Control knobs with illuminated ring, cooking zone and output level markings.
Electronic power control in 12 pakāpes (1…12).
User friendly control with two color display (white / orange).
Flex function for rectangular cooking areas.
Frying sensor function.
Booster function.
Short-term timer.
Options menu.
Cooktop-based ventilation control (with suitable hood).
Integrated WiFi module for digital services (Home Connect).
The availability of the Home Connect functionality depends on the availability of the Home Connect Services in your country. Home Connect Services are not available in every country – for further information please check:
Safety shut-off.
Planning notes
Depending on the type of installation (surface-mounted or flush-mounted), the specific location of the cut-out and the knob positions may vary.
The horizontal positioning of the knobs may be aligned with the specific cooking areas and zones.
The drawing "Installation of the control knob" must be observed if the panel is more than 23 mm thick (there must be a recess at the rear).
If combining several Vario appliances of the 400 series, a connection strip VA 420 must be placed between the appliances. Depending on the type of installation, the corresponding connection strip must be provided.
The bearing capacity and stability, in the case of thin worktops in particular, must be supported using suitable substructures. Take into account the appliance weight and additional loads.
Additional instructions for flush installation:
Installation is possible in worktops made of stone, synthetics or solid wood. Heat resistance and watertight sealing of the cut edges must be observed. Concerning other materials please consult the worktop manufacturer.
The groove must be continuous and even, so that uniform placing of the appliance on the gasket is ensured. Do not use discontinuous lining.
The joint width may vary due to size tolerances of the combinations and of the worktop cut-out.
If installing several appliances in individual cut-outs allow for a division bar of minimum 50 mm between the individual cut-outs.
Operates with magnetic (induction) iron pots and pans only. For an optimal heat distribution, the use of sandwich bottom cookware is recommended.
Appliance can be snapped into the worktop from above.
Appliance weight: approx. 24.
Total connected load 11.1 KW.
Connecting cable 1.5 m without plug.
Power consumption standby/display off 0.5 W.
Power consumption standby/network 1.9 W.
Please check the user manual for how to switch off the WiFi module.
Installation width 90 cm
Size 55 x 908 x 520 mm
Weight 20 kg

Write a review

Note: HTML is not translated!
    Bad           Good
  • Brand: Gaggenau
  • Product Code: VI 492 113
  • Availability: 7-14 working days
  • Free door-to-door delivery, insurance
  • Import fees: approximately 15% additional
  • Item price: AU$ 984

    Shipping, handling, insurace:AUD 4,265

    • Total price: AUD 5,249