SIEMENS ED711FQ15E

SIEMENS ED711FQ15E

The induction hob with integrated extractor hood.
Combine two cooking zones for more flexible cooking - combi zone.
Thanks to touchSlider operation, the temperature is controlled by tapping or swiping directly on the control scale with just one finger.
Shorter heating times with up to 50% more power - powerBoost function.
Switches off the cooking zone safely - timer with safety shutdown.
Safely prevents unwanted switching on - childproof lock.

Professional equipment
touchSlider
Design:
Frameless
Furnishing:
2 CombiZone cooking zones
powerMove
reStart
quickStart
Timer countDown Function
17 power levels
Environment and safety:
Pot detection powerManagement function Automatic safety shutdown Childproof lock Wipe protection function
2-level residual heat display per cooking zone
Main switch
Energy consumption display
Speed:
powerBoost function possible for all induction cooking zones
Performance and size:
Kochzonen: 1 x 380 mm x 210 mm, 3.6 kW Induction oder 2 x 190 mm, 210 mm, 2.2 kW (max. power 3.7 kW) Induction; 1 x 380 mm x 210 mm, 3.6 kW Induction oder 2 x 190 mm, 210 mm , 2.2 kW (max power 3.7 kW) Induction
Dimensions:
Installation dimensions: (H / W / D) 223 mm x 560 mm x 490 mm
Unit dimensions: (W / D) 710 mm x 522 mm
Min. Worktop thickness: 16 mm
Length of connecting cable: 110 cm
Connection cable enclosed in packaging
Connected load: 7.4 kW
Integrated downdraft ventilation system
Condensate and overflow protection container, approx. 200 ml capacity
Grease filter efficiency class: B
Range hood performance:
Noise values ​​for exhaust air operation: min. Normal level 42 dB re 1 pW, max. Normal level 69 dB re 1 pW, max. Boost / intensive level 74 dB re 1 pW
Noise levels in recirculation mode: min. Normal level 41 dB re 1 pW, max. Normal level 68 dB re 1 pW, max. Boost / intensive level 72 dB re 1 pW
Grease filter efficiency: 94%.
Induction hob with fully integrated, powerful downdraft extraction module.
Optional exhaust air or recirculation mode (special accessories are required in each case) HZ9VEDU0 acoustic filter for exhaust air mode HZ9VRPD0 for fully or partially guided recirculation mode including cleanAir recirculation filter HZ9VRUD0 for unguided recirculation mode including cleanAir recirculation filter
Automatic switching on of the ventilation system when using a cooking zone
9 electronically controlled power levels and 2 boost / intensive levels (with automatic reset) by the touchSlider control fan run-on for 30 minutes
Large, 12-layer stainless steel grease filter for high grease filtration efficiency (94%)
Blower technology with highly efficient, low-noise, brushless DC motor (BLDC). Flow-optimized air flow in the interior
Easy removal and cleaning of the grease filter and overflow protection unit:
All parts are easy to clean, dishwasher-safe and heat-resistant
Automatic delayed switch-off after cooking to remove residual odors after cooking (in specific ultra-low-noise fan speed, 12min (exhaust air), 30min (circulating air), can be switched off manually)
A total absorption capacity of 900ml (200ml + 700ml)
Average energy consumption: 61.6 kWh / year
Energy efficiency class: B (on a scale of energy efficiency classes from A +++ to D)
Fan efficiency class: A
Min./max. Normal level: 42 dB & 69 dB
Fully manual control possible via touchSlider
Convenient one-hand removal of the unit via a floating glass ceramic handle
Safety overflow tank (dishwasher safe) with additional 700ml capacity. Easily accessible and removable from below.
- Waterproof ventilation system
Exhaust air output (according to EN 61591): min. Normal level 154 m3 / h, max. Normal level 500 m3 / h, max. Boost / intensive level 622 m3 / h
Umlufleistung (nach EN 61591): min. Normalstufe 150 m3 / h, max. Normalstufe 500 m3 / h, max. Boost- / Intensivstufe 615 m3 / h
All performance data are preliminary, based on the latest test results with prototypes and will be updated as soon as final data are available.
- Average energy consumption: 57.
With air recirculation mode, 2 x 2 directly integrated, powerful cleanAir air recirculation filters - Optimized odor reduction capabilities for cooking applications with complex odor molecule chains (e.g. fish odors) - Large filter surface with high odor reduction rate - Filter service life of 360 hours during intensive cooking - Very low noise with optimized psychoacoustics - Easy accessibility and easy removal above through the air intake - cleanAir replacement filter set HZ9VRCR0.
Optimized odor reduction capabilities in cooking applications with complex odor molecule chains (e.g. fish odors)
Large filter surface with a high odor reduction rate
Filter service life of 360h with intensive cooking (cannot be regenerated)
Very low noise with optimized psychoacoustics
Easy access and easy removal from above through the air inlet
With recirculation mode, 2 x 2 directly integrated, powerful cleanAir recirculation filters
Planning and installation instructions
Optionally suitable for exhaust air or recirculation mode (including differentiated software modes). Mandatory installation accessories are required: - HZ9VEDU0 for exhaust air operation - HZ9VRPD0 for fully or partially guided recirculation mode with cleanAir air circulation filters - HZ9VRUD0 for unguided air circulation operation with cleanAir air circulation filters.
Planning is possible as wall and island planning
The product fulfills the requirements of the needle flame test (according to IEC 60695-5-11), the V2 flammability class (according to UL94) and the B1 building material class for flame-retardant materials (according to DIN 4102-1). The starter kit HZ9VRUD0 for the unguided recirculation mode also meets these requirements.
The maximum immersion depth is 223mm under glass for surface-mounted devices and 227mm for flush-mounted devices.
The device must remain freely accessible from below
No intermediate floors are necessary. The "Plug 'n Play" starter set HZ9VRUD0 (unguided recirculation mode) requires a vertical return flow opening of min. 25mm behind the rear wall of the furniture - Recommendation: 50mm The minimum worktop thickness is 16mm for surface-mounted and flush-mounted devices Total device weight: 26kg The load-bearing capacity and stability, especially with thin worktops, must be ensured by suitable substructures. Here, the weight of the device (including corresponding complaints such as filled pots) and the specifications of the worktop manufacturer regarding structural integrity must be observed. The "Plug 'n Play"
There is no need for a false floor under the device. The drawers must be removable. The rear wall can be left - only a cut-out for the air outlet is required (position and size can be found in the installation instructions).
The minimum worktop thickness is 16mm for surface-mounted and flush-mounted devices with the standard installation system. Installation in thinner worktops is also possible with the spare part: content area 626792
The total device weight is 26kg. The load-bearing capacity and stability, particularly with thin worktops, must be ensured by suitable substructures. Here, the weight of the device (including corresponding complaints such as filled pots) and the specifications of the worktop manufacturer regarding structural integrity must be observed
An air return flow opening of ≥400cm² in the base area is required for all partial and unguided recirculation plans. The opening can be realized via outlet grille, louvre grille or slightly shortened base, depending on the assortment of the kitchen furniture manufacturer.
Piping up to 8m possible with three 90 ° bends
A backflow flap with a maximum opening pressure of 65Pa should be installed in the exhaust air mode.